2013+ Subaru BRZ / Scion FR-S / Toyota GT86 Baffled Oil Catch Can Installation Guide


Все видео канала Mishimoto Automotive2015-01-08 21:56

Product Page: http://mishimo.to/23e1YMZ
Facebook: http://www.facebook.com/GoMishimoto
Twitter: http://www.Twitter.com/Mishimoto
Instagram: http://www.Instagram.com/Mishimoto
Engineering Blog: http://engineering.mishimoto.com/


• Single can mounting in line with the PCV system separates oil particles using 50 micron bronze filter
• Application-specific bracket mounts the can in a serviceable location
• Billet 6061 aluminum sealed can
• Protects the high-revving Subaru Boxer engine from oil blow-by
• Helps maintain proper octane levels to reduce detonation
• Filter and can are fully serviceable
• Internal air diverter turbulates air longer to improve oil separation
• No cutting or modification required
• Offered with black, blue, or red silicone hoses
• Works in conjunction with aftermarket strut tower bars and diagonal braces
• Fits LHD / RHD models
• Mishimoto Lifetime Warranty

Model: MMBCC-BRZ-13P

2013+ Subaru BRZ/Scion FR-S Baffled Oil Catch Can, PCV Side Installation Guide

PARTS LIST
(1) Application-Specific Mounting Bracket
(1) Anodized 6061 Aluminum Catch Can, Black
(2) Silicone Hoses
(2) Plastic Barbed Fittings
(4) Worm-Gear Clamps

TOOLS NEEDED
2.5MM ALLEN KEY
12MM DEEP SOCKET
18MM DEEP SOCKET
3/8” DRIVE 3” EXTENSION
3/8” DRIVE RATCHET
FLATHEAD SCREWDRIVER

Install Time: 20 Minutes
Difficulty: 2/5

DISCLAIMER
• Raise vehicle only on jack stands or on a vehicle lift.
• Allow vehicle to cool completely prior to attempting installation.
• Do not run the engine or drive the vehicle while overheating.
Serious damage can occur.
• Please dispose of any liquids properly.
• Mishimoto is not responsible for any vehicle damage or personal
injury due to installation errors, misuse, or removal of
Mishimoto products.
• Mishimoto suggests that a trained professional install all
Mishimoto products.

INSTALLATION INSTRUCTIONS
1. Remove the engine cover. (flathead screwdriver)

2. Remove the passenger-side hose on top of the intake manifold.
(Note: This hose does not have a clamp.)

3. Remove the other end of the passenger-side hose from the PCV
valve. (Note: Determine the direction of this hose by observing the
diameter of each end. The engine side is 12mm and the PCV side
is 10mm.)

4. Remove the 1x 12mm nut from the passenger-side
shock-tower brace.

5. Loosen the remaining engine-side 1x 12mm nut from the
passenger-side shock-tower brace.

6. Slide the catch can bracket onto the loosened nut and tighten it.

7. Reinstall the 1x 12mm nut that was removed from the
passenger-side shock-tower brace.

8. Ensure that the bracket is level and all hardware is tightened.

9. Twist the provided fittings onto the in and out ports of the catch
can. (2x barbed fittings]

10. You can now tighten the fittings onto the catch can.
(18mm socket)

11. Install the catch can onto the catch can bracket using the
provided Allen screws. (2x 2.5mm Allen screws)

12. Install the silicone hose that runs from the in port on the catch
can to the PCV valve. (2x worm-gear clamps)

13. Install the silicone hose that runs from the out port on the catch
can to the intake manifold. (2x worm-gear clamps)

14. Reinstall the engine cover by pressing it downward.

15. Double-check to ensure all connections are properly
seated and tightened.

16. You have now successfully installed the Mishimoto
2013+ Subaru BRZ/Scion FR-S Baffled Oil Catch Can.
Enjoy!

Download the MMBSS-BRZ-13P install guide here: http://lib.store.yahoo.net/lib/yhst-6...